Polyether ether ketone / Cross recessed flat head screw
Cross recessed flat head screw
Part number
| PEEK/FHM-L |
| Continuous use temperature | 260°C/500°F |
|---|---|
| Flammability | UL94 V- 0 |
Quantity
Torsional rupture torque
| Unit | M1.7 | M2 | M2.5 | M2.6 | M3 | M4 |
|---|---|---|---|---|---|---|
| N • m | 0.038 | 0.071 | 0.15 | 0.15 | 0.21 | 0.47 |
| 単位／Unit | M5 | M6 | M8 | M10 | M12 | M16 |
| N • m | 0.96 | 1.64 | 3.68 | 7.90 | 13.64 | - |
Tensile rupture force
| Unit | M1.7 | M2 | M2.5 | M2.6 | M3 | M4 |
|---|---|---|---|---|---|---|
| N | 81 | 165 | 264 | 291 | 405 | 738 |
| 単位／Unit | M5 | M6 | M8 | M10 | M12 | M16 |
| N | 1234 | 1749 | 3261 | 5256 | 7650 | - |
- Black spots may occasionally appear on the external surface.
- Gate residue of screw head is 5% or less for length (L).
- If screw is used with a nut, we recommend using the screw and nut made of the same material.
- If screw is used with a female threaded part, we recommend maximum depth of 20 mm.
- Values in the table are for reference purpose only, and they are not guaranteed values.
- Please use torque driver or torque wrench for fastening. Recommended fastening torque is 50% of the torsional rupture torque.
- Since heat resistance and chemical resistance change based on usage conditions, please test under actual usage conditions beforehand.
- Discoloration may occur depending on lot and various conditions.
- Sizes, shapes and manufacturers of raw materials may change without notice.